.

Via delle Fabbriche Nuove, 7 - 13856 Vigliano Biellese (Biella) Italy

Tel. 039 015.81.29.93.9 Telefax. 015.81.29.95.8

SOME USED MACHINES AVAILABLE SUBJECT TO PRIOR SALE:

WEAVING LOOMS: SULZER: PG 253: N. 01 SULZER RAPIER LOOMS MODEL G6100 S190 N4 JQ G1 - YEAR 1988 - PREDISPOSED FOR JACUARDS - WIDTH 190 CM - VOLTAGE 380V 50HZ - 4 COLOURS - ELECTRONIC LET OFF - MACHINE EQUIPPED WITH: N. 1 BEAM + N. 2 CLOTH ROLLS + N. 2 WEFT FEEDERS + N. 1 CREEL + N. 5.000 DROPPERS   PG 451: N. 4 SULZER PROJECTILE LOOMS - MODEL PU 153" V.S.I.S110D1FRJ - 4 COLOURS - YEAR 1986 - WITH JACQUARD STAUBLI CX 860 1344 - 1200 MOUNTED - JC4 CONTROLLER - YEAR 1995 - SERIAL NUMBERS OF LOOMS: 985... - SERIAL NUMBERS OF JACQUARDS: 0501001-03/0501002-03/0501003-03/0501004-03-EACH LOOM EQUIPPED WITH THE FOLLOWING ACCESSORIES: HARNESS 24.000 ENDS + 12.000 DROPPERS + WARP STOP MOTION 6 BARS + 4 WEFT FEEDERS SAVITEC + WITH 1 CREEL + 1.5 CLOTH ROLLS (6 FOR ALL 4 LOOMS) + MECHANICAL LET OFF ORIGINAL SULZER + 4 FULL BEAMS OR 8 HALF BEAMS WILL BE SUPPLIED ALONG WITH ALL LOOMS PG 451A: N. 5 SULZER PROJECTILE LOOMS MODEL PU 143" V.S.I. S110 D1 FJ - 4 COLOURS - YEAR 1986 - WITH JACQUARD STAUBLI CX 860 2688, 2400 MOUNTED - JC4 CONTROLLER - YEAR 1987-90-93 - SERIAL NUMBERS OF LOOMS: 100...SERIAL NUMBERS OF JACQUARDS: 90543-01/90543-03/93075-01/93075-02/87118-04 - EACH LOOM EQUIPPED WITH THE FOLLOWING ACCESSORIES: HARNESS 24.000 ENDS + 12.000 DROPPERS + WARP STOP MOTION 6 BARS + 4 WEFT FEEDERS IRO + 1 CREEL + 1.5 CLOTH ROLLS + MECHANICAL LET OFF ORIGINAL SULZER + 5 FULL BEAMS OR 10 HALF BEAMS WILL BE SUPPLIED ALONG WITH ALL LOOMS PG 655: N. 6 SULZER LOOMS MODEL P7200 W 220 SP K3 - YEAR 1995 - WORKING WIDTH 220 CM - (4) 4 COLOURS - (2) 6 COLOURS - EACH MACHINE EQUIPPED WITH: ELECTRONIC DOBBY STAUBLI 18 LEVERS + 1,5 BEAM + 1,5 CLOTH ROLL + 16 GROB HEALD FRAMES + WARP STOP MOTION 6 BARS + COMPLETE SET OF PROJECTILES AND TEETH GUIDE + 4 WEFT FEEDERS SAVITEC WITH CREEL AND ELECTRIC BOX + SET OF SPARES  PG 720: N. 12 SULZER RAPIER LOOMS MODEL G6200 220 N6 SP 16/16 - WORKING WIDTH 220 CM - (1) WITH ELECTRONIC DOBBY STAUBLI 2662 16 LEVERS YEAR 1995 - (11) WITH ELECTRONIC DOBBY FIMTESSILE RD830 16 LEVERS YEAR 1996 - ALL LOOMS HAVE GEAR BOX HIGH SPEED TYPE BEING LOOMS AFTER 1995 - ELECTRONIC LET OFF AND TAKE UP - EACH MACHINE EQUIPPED WITH: 12 HEALD FRAMES GROB + 1,5 BEAM FLANGE DIAM. 800 MM + 1,5 CLOTH ROLLS + LENO SELVEDGE + 4 WEFT FEEDERS SAVITECH PENTA 3 + 1 CREEL + 5.000 + 5.000 HEDDLES AND DROPPERS + 1 WARP STOP MOTION PG 809: N. 4 SULZER RAPIER LOOMS MODEL G6200 220 N6SP - WORKING WIDTH 220 CM - WITH ELECTRONIC DOBBY STAUBLI 2662 16 LEVERS - YEAR 1993 AND 1994 - ELECTRONIC LET OFF AND TAKE UP - EACH MACHINE EQUIPPED WITH: 12 HEALD FRAMES GROB + 1 BEAM FLANGE DIAM. 800 MM + 1,5 CLOTH ROLLS + WITH SIDE TUCKIN + 4 WEFT FEEDERS + 1 CREEL + 5.000 + 5.000 HEDDLES AND DROPPERS + 1 WARP STOP MOTION PG 840: N. 16 SULZER LOOMS MODEL P7100 B360 N1-1 EP R D1 - YEAR 1990 - CAM MOTION LOOMS - 2 COLOURS REINFORCED MACHINES FOR DENIM - TWIN BEAMS - MACHINES WITH DELIVERY BY BIG BATCHING - BUT PREDISPOSED FOR CLOTH ROLL - EACH MACHINE EQUIPPED WITH: 8/10 HEALD FRAMES + 1 CREEL + 2 WEFT FEEDERS + 8.500 + 8.500 HEDDLES AND DROPPERS +  HALF BEAMS FLANGE DIAM. 940 MM + CLOTH ROLLS PG 847B: N. 2 SULZER PROJECTILE LOOMS MODEL PU 153 VSD 110 KR D1 F - TWIN BEAMS - WITH DOBBY STAUBLI KR 20 LEVERS - 4 COLOURS - 10 HEALD FRAMES -  PG 847 C: N. 4 SULZER PROJECTILE LOOMS MODEL TW11 153 VSD 105 KR F - TWIN BEAMS - WITH DOBBY STAUBLI KR 20 LEVERS - 4 COLOURS - 10 HEALD FRAMES NISSAN: PG 847: N. 14 WATER JET LOOM MAKE NISSAN MODEL W54 - WITH ELECTRONIC DOBBY STAUBLI 12 LEVERS - YEAR 1990 WIDTH 190 CM - 1.5 + 1.5 BEAM AND CLOTH ROLLS + N. 10 WATER JET LOOM MAKE NISSAN MODEL W52 - SAME OF ABOVE 1 COLOUR SOMET:   PG 496: N. 24 AIRJET LOOMS MAKE SOMET MODEL MYTHOS - WIDTH 210 CM - YOC 2001 - 380 V 50 HZ - 4 COLORS/FOUR ACCUMULATORS TE STRAKE  - ELECTRONIC AIR CONTROL - STAUBLI DOBBY 2871 16 SHAFTS DRC4 - EACH MACHINE EQUIPPED WITH: 2 BEAMS EURO FLANGES DIAM. 1100 MM + ELECTRONIC LENO + 16 HEDDLE FRAMES + WITH CLOTH ROLLER DRIVE + 4.000 HEDDLES AND DROPPERS + COMPLETE LOOMS CHECKED AND UPDATED WITH GUARANTEE FOR THE WORKING AND GOOD RUNNING   PG 781: N. 4 SOMET EXCEL RAPIER LOOMS - WORKING WIDTH 210 CM - YEAR 1995/96/97 - WITH 8 COLOURS - WITH ELECTRONIC DOBBY STUABLI 2660 - 20 LEVERS - WITH TAKE UP AND LET OFF ELECTRONIC - WITH ON LOOM CONTROL PANEL - EACH MACHINE EQUIPPED WITH: 12 HEALD FRAMES + 1 CREEL + 1 WARP STOP MOTION + 4 WEFT FEEDERS + 1.5 BEAMS AND CLOTH ROLLS + 5.000 HEDDLES + 5.000 DROPPERS + 2 BEAM + 2 CLOTH ROLLERS   PG 787: N. 10 SOMET RAPIER LOOMS MODEL SM93 - 230CM WIDTH - WITH 8 COLOURS - WITH MECHANICAL JACQUARD GROSSE UNIRAPID 1344 HOOKS - ELECTRONIC CONTROL PANEL OF LOOM - WITH 380V 50HZ - EACH MACHINE EQUIPPED WITH: 4 WEFT FEEDERS LGL + 1 CREEL + 6000 DROPPERS + 1 BEAM + 1 CLOTH ROLL + HARNESS OF 30 TO 26 ENDS/CM PG 797: N. 2 SOMET RAPIER LOOMS MODEL THEMA 11E - 104Y SERIES WIDTH 210 CM - YEAR 1992 - 8 COLOURS - WITH ELECTRONIC DOBBY STAUBLI 2660 WITH 20 LEVERS ALL INSTALLED - ELECTRONIC LET OFF ON ALL MACHINES MECHANIC TAKE UP - GFG FLOATING GUIDES - VOLTAGE 380V 50HZ - EACH MACHINE EQUIPPED WITH: N. 10 HEALD FRAMES + N. 1 CREEL + N. 1 WARP STOP MOTION WITH 5 BARS + N. 4 WEFT FEEDERS ROJ QUARTZ + N. 5000 DROPPERS AND HEDDLES + N. 2 BEAMS + N. 2 CLOTH ROLLS PG 823: N. 12 AIRJET LOOMS MAKE SOMET MODEL MYTHOS TEC - SERIAL ZA05 ZA06 - YEAR 2003 - WIDTH 220 CM - 4 COLOURS - DOBBY STAUBLI MODEL 2871 WITH 16 SHAFTS INSTALLED WITH DRC4 SUPPORT - 380 V 50 HZ - EACH MACHINE EQUIPPED WITH: 4 ACCUMULATORS ROJ SUPERELF WITH ELECTRONIC BRAKE PTD + ELECTRONIC AIR CONTROL 1,5 BEAMS FLANGES DIAM. 1000 MM + WITH INVERTER + ELECTRONIC ELD LENO + 16 HEDDLE FRAMES + WITH CLOTH ROLLER DRIVE + 4/5000 HEDDLES AND DROPPERS PG 843: N. 24 SOMET LOOMS MODEL SM93 - WITH STAUBLI DOBBY - 8 COLOURS - DETAILS AS FOLLOW:N. 8 MACHINES WW 210 CM WITH SOCOS WITH ELECTRONIC DOBBY 2660 20 LEVERS -N. 6 MACHINES WW 210 CM WITHOUT SOCOS WITH ELECTRONIC DOBBY 2660 20 LEVERS - N. 10 MACHINES WW 190 CM WITH MECHANIC DOBBY 2212 12 LEVERS - EACH MACHINE EQUIPPED WITH: 1 CREEL + 10 HEALD FRAMES FOR MACHINES 210 CM + 8 HEALD FRAMES FOR MACHINES 190 CM + 4 WEFT ACCUMULATORS FOR MACHINES 210 CM + 2 WEFT ACCUMULATORS FOR MACHINES 190 CM + 1,5 BEAMS + 1,5 CLOTH ROLLERS + 5.000 HEDDLES + 5.000 DROPPERS PG 844: N. 2 SOMET RAPIER LOOMS MODEL THEMA 11 SERIES 104 - WIDTH 3600 MM - YEAR 1993 - ELECTRONIC TAKE OFF ELECTRONIC TAKE UP - WITH JACQUARD ELECTRONIC STAUBLI TYPE CX860-  YEAR 1992 - 2688 HOOKS ALL MOUNTED CONTROLLER JC4 - MODULES M4 - HARNESSES 19.200 ENDS - LOOM EQUIPPED WITH: 2 BEAMS WITH FLANGES + 2 CLOTH ROLLS + 1 WARP STOP MOTION + 19.200 HEDDLES + 2 WEFT FEEDERS LGL SIRIO ROBOT + WITH BOX AND CREEL  PG 848: N. 2 SOMET EXCEL RAPIER LOOMS - WORKING WIDTH 220 CM - YEAR 1997 - GFG FLOATING GUIDES - WITH 8 COLOURS - WITH ELECTRONIC DOBBY STUABLI 2660 - 20 LEVERS - WITH TAKE UP AND LET OFF ELECTRONIC - WITH ON LOOM CONTROL PANEL - EACH MACHINE EQUIPPED WITH: 11 HEALD FRAMES + 1 CREEL + 1 WARP STOP MOTION + 4 WEFT FEEDERS ROY QUARTZ + 1.5 BEAMS AND CLOTH ROLLS + 5000 HEDDLES + 5000 DROPPERS SMIT NUOVO PIGNONE: PG 798 A: N. 4 SMIT RAPIER LOOMS MODEL TP522 - WIDTH 220 CM - YEAR 1986 - 8 COLOURS - WITH MECHANIC DOBBY STAUBLI WITH 20 LEVERS ALL INSTALLED ON 1 MACHINE AND MECHANIC KAISER DOBBY WITH 20 LEVERS INSTALLED ON 3 MACHINES - WITH LP8 INSERTION DEVICE - VOLTAGE 380V 50HZ - EACH MACHINE EQUIPPED WITH: N. 20 HEALD FRAMES N. 1 CREEL + N. 1 WARP STOP MOTION WITH 5 BARS + N. 4 WEFT FEEDERS + N. 5000 DROPPERS AND HEDDLES + N. 2 BEAMS + N. 2 CLOTH ROLLS VAMATEX: PG 559: N. 12 RAPIER LOOMS MAKE VAMATEX MODEL P1001 - (6) YEAR 1989, (6) YEAR 1991 - WORKING WIDTH 2300 MM WITH ELECTRONIC DOBBY FIMTESSILE HP 700, 20 LEVERS - 10 HEALD FRAMES - WITH ELECTRONIC LET OFF - WITH CONTROL PANEL WITH PROGRAMMER - WITH 8 COLOURS - 4 WEFT FEEDERS -1.5 BEAM AND CLOTH ROLL - WORKING ON SILK FABRICS PG 559 A: N. 5 RAPIER LOOMS MAKE VAMATEX MODEL 9000 PLUS - YEAR 1994 - WORKING WIDTH 2300 MM - POSITIVE RAPIER - WITH ELECTRONIC DOBBY FIMTESSILE RD810, 20 LEVERS - WITH 10 HEALD FRAMES - 8 COLOUR MACHINE ELECTRONIC LET OFF AND TAKE UP - WITH PROGRAMMER CONTROL PANEL - WITH 4 WEFT FEEDERS AND CREEL - WITH 1.5 BEAM AND CLOTH ROLL - WORKING ON SILK FABRICS - 380V 50HZ  PG 559 B: N. 6 RAPIER LOOMS MALE VAMATEX MODEL 9000 PLUS ES - YEAR 1996 - WORKING WIDTH 2300 MM - POSITIVE RAPIER - WITH ELECTRONICDOBBY FIMTESSILE RD840, 20 LEVERS - WITH 10 HEALD FRAMES - 8 COLOUR MACHINE ELECTRONIC LET OFF AND TAKE UP - WITH PROGRAMMER CONTROL PANEL - WITH 4 WEFT FEEDERS AND CREEL - WITH 1.5 BEAM AND CLOTH ROLL - WORKING ON SILK FABRICS - 380V 50HZ PG 585: N. 2 VAMATEX RAPIER LOOMS MODEL P 1001 - YEAR 1994 - WORKING WIDTH 2300 MM, WITH ELECTRONIC JACQUARD STAUBLI MODEL CX860, 1344 HOOKS, YEAR 1994, CONTROLLER JC4, EACH MACHINE EQUIPPED WITH: HARNESS 7.960 ENDS + 8.000 DROPPERS + 2 SIDE TUCK IN UNITS VAMATEX + 2 WEFT FEEDERS QUARTZ HT + 1 CREEL + 2 BEAMS + 2 CLOTH ROLLERS  PG 585C: N. 2 VAMATEX RAPIER LOOMS MODEL P1001, YEAR 1991, WORKING WIDTH 2300 MM, WITH MECHANICAL JACQUARD STAUBLI MODEL CR520, 1344 HOOKS, EACH MACHINE EQUIPPED WITH: HARNESS + DROPPERS + 2 SIDE TUCK IN UNITS VAMATEX + 1 CREEL + 2 WEFT FEEDERS QUARTZ + 2 BEAMS + 2 CLOTH ROLLERS  PG 585D: N. 4 VAMATEX RAPIER LOOMS MODEL P1001, YEAR 1990, WORKING WIDTH 2300 MM, WITH MECHANICAL JACQUARD STAUBLI MODEL CR620, 1344 HOOKS, EACH MACHINE EQUIPPED WITH: HARNESS + DROPPERS + 2 SIDE TUCK IN UNITS VAMATEX + 1 CREEL + 2 WEFT FEEDERS QUARTZ + 2 BEAMS + 2 CLOTH ROLLERS  PG 585E: N. 2 VAMATEX RAPIER LOOMS MODEL C401S, YEAR 1987, WORKING WIDTH 2100 MM, WITH MECHANICAL JACQUARD FIMTESSILE MODEL AFC 190, 1344 HOOKS, EACH MACHINE EQUIPPED WITH: HARNESS 6.470 ENDS + 6.500 DROPPERS + 2 SIDE TUCK IN UNITS VAMATEX + 1 CREEL + 2 WEFT FEEDERS AT1200 + 2 BEAMS + 2 CLOTH ROLLERS PG795: N. 4 RAPIER TERRY LOOMS VAMATEX MAKE MODEL SP 1151 E - WIDTH 360 CM - TERRY PRODUCTION LOOMS WITH FIMMTESSILE DOBBY ELECTRONIC 20 LEVERS - YEAR 1994 - 8 COLOURS - EACH MACHINE EQUIPPED WITH: BEAM: 4 PCS (2+2) + CLOTH ROLLER: 2 PCS + FRAME: 14 + DROP WIRE: 10.000 + HEADLESS: 10.000 + MACHINES ARE STILL ON MILL FLOOR RUNNING PICANOL: PG 789: N. 7 RAPIER LOOMS MAKE PICANOL MODEL GAMMA 8 R - YEAR 2002 (6) YEAR 2001 (1) - WIDTH 220 CM - WITH DOBBY STAUBLI 2681 - (6) 24 LEVERS - (1) 20 LEVERS - ELECTRONIC LET OFF AND TAKE UP - EACH MACHINE EQUIPPED WITH: 4 WEFT FEEDERS ROJ CHRONO + 1,5 BEAM AND 1,5 CLOTH ROLL + 20 HEALD FRAMES + 4000+4000 HEDDLES AND DROPPERS DORNIER: PG 450: N. 2 DORNIER AIR JET LOOMS MODEL  LWV6/S WORKING WIDTH 3600 MM - 6 COLOURS -  YEAR 1995 - WITH JACQUARD STAUBLI CX880 1408 HOOKS 1200 MOUNTED - JC5 CONTROLLER -  YEAR 1999 - SERIAL NUMBERS: 71263 /71264 UPDATED DIALOG PANEL 2 - JACQUARD SERIAL NUMBERS:  W99-8T59A1-M01/W99-8T59A1-M02 - EACH LOOM EQUIPPED WITH: 24.000 HEDDLES FOR SPRINGS 72 ENDS/CM - 12.000 DROPPERS - WARP STOP MOTION 6 BARS - 6 WEFT FEEDERS SUPER-ELF WITH 1 CREEL - DOUBLE MOTOR FOR TWIN BEAMS  PG 450A: N. 4 DORNIER AIR JET LOOMS MODEL  LWV8/S - WORKING WIDTH 3600 MM - 8 COLOURS -  YEAR 1998/99 - WITH ELECTRONIC DOBBY STAUBLI TYPE 2670-P1 - 16 LEVERS - SERIAL NUMBERS: 72778 -72779-73472-73473 - EACH LOOM EQUIPPED WITH: 8 HEALD FRAMES GROB - 12.000 + 12.000 HEDDLES AND DROPPERS - WARP STOP MOTION 6 BARS - 6 WEFT FEEDERS SUPER-ELF WITH 1 CREEL - DOUBLE MOTOR FOR TWIN BEAMS  PG 742: N. 13 DORNIER RAPIER LOOMS MODEL 2 X HTV6/SD OF YEAR 1990 - 2 X HTVS4/SD OF YEAR 1992 - 8 X HTVS4/SD OF YEAR 1994 - 1 X HTVS4/SD OF YEAR 1995 - WORKING WIDTH 2200 MM - WITH ELECTRONIC STAUBLI DOBBY MODEL 2667 - WITH ELECTRONIC LET OFF AND TAKE UP - 380V 50HZ - EACH MACHINE EQUIPPED WITH: 4 WEFT FEEDERS + 1,5 CLOTH ROLLS + 1,5 BEAMS + 1 CREEL WITH BOX + 1 WARP STOP MOTION + 5.000 HEDDLES + DROPPERS   PG 819: N. 1 DORNIER LOOM MODEL GTN8/SD - SERIAL 18053 - YEAR 1984 - WORKING WIDTH 200 CM - WITH JACQUARD STAUBLI CX860 SERIAL 8945701 - 2688 HOOKS - YEAR 1989 - WITH HARNESS 2176 ENDS - WARP STOP MOTION - 4 WEFT FEEDERS WITH CREEL - 1 BEAM FLANGE DIAM. 800 MM PG 819 A: N. 1 DORNIER LOOM MODEL GTN8/SD - SERIAL 18049 - YEAR 1984 - WORKING WIDTH 200 CM WITH JACQUARD GROSSE SERIAL 48152 - 1792 HOOKS - YEAR 1994 - WITH HARNESS 1800 ENDS - WARP STOP MOTION - 4 WEFT FEEDERS WITH CREEL - 1 BEAM FLANGE DIAM. 800 MM PG 855: N. 3 RAPIER WEAVING MACHINE DORNIER  - MODEL HTVS 8/S - YEAR 2000 - WIDTH 210 CM - WITH ELECTRONIC DOBBY STÄUBLI TYPE 2667 FOR 28 LEVERS - 20/22 LEVERS INSTALLED FOR HARNESS FRAMES - MACHINES WITH ELECTR. CLOTH TAKE UP (ECT) - ELECTR. COLOUR SELECTION (ECS), ELECTR. WARP LET OFF (EWL) - WARP STOP MOTION GROB 1600 - 5 BARS INSTALLED - AT CONTROL PANEL 1 - ACCESSORIES PER EACH MACHINE: 12 HARNESS FRAMES + 2 CLOTH ROLLERS + 4 ACCUMULATORS IRO GALAXY PG 856: N. 11 DORNIER RAPIER LOOMS MODEL PTV8/S - WORKING WIDTH 220 CM - YEAR 2003 - ELECTRONIC AT DIALOG PANEL 2 - ELECTRONIC TAKE UP AND LET OFF - 8 COLOURS WITH ELECTRONIC SELECTOR - WITH DOBBY STAUBLI 2670 20 LEVERS - WARP STOP MOTION GROB 6 BARS - EACH LOOM EQUIPPED WITH: 14 HEALD FRAMES + 6 WEFT FEEDERS ROJ + 2 CLOTH ROLLS + 2 BEAMS + 5.000 + 5.000 HEDDLES AND DROPPERS  TSUDAKOMA: PG 743: N. 7 TSUDAKOMA AIRJET LOOMS MODEL ZA205I - YEAR 1992 - WORKING WIDTH 170 CM - 2 COLOURS - STAUBLI DOBBY 2580-RS WITH 16 LEVERS CAPACITY 12 INSTALLED - 380V 50HZ - EACH MACHINE EQUIPPED WITH:  1 CREEL + 2 WEFT ACCUMULATORS + 6 HEALD FRAMES + 2 BEAMS DIAMETER 800 MM + 2 CLOTH ROLLERS + 1 WARP STOP MOTION + 6000+6000 HEDDLES AND DROPPERS PG 847A: N. 10 AIR JET LOOMS TSUDAKOMA - MODEL ZAX (2) 209i (8) - WIDTH 210 CM - WITH STAUBLI DOBBY - YEAR 1998 - 1,5 + 1,5 BEAM AND CLOTH ROLL - WITH NO. 2 COMPRESSORS ZT75 + ZT90 OIL FREE SECTIONAL AND SAMPLE WARPING MACHINES:   PG 357: N. 1 SECTIONAL WARPING MACHINE BENNINGER MODEL BENMATIC - YEAR 1997 - 220 CM WIDTH - FLANGE MAX 995 - RUNNING 800 - ELECTRONIC CONTROLS FOR SECTION - CONE DIAMETER 800 MM - DIGITAL DISPLAY (LANGUAGES AVAILABLE ENGLISH, SPANISH, FRANCH, GERMAN) - PADDLE FOR SLOW MOVEMENT FORWARD/BACKWARD - MAX/MIN TENSION OF BEAMING 3.00 TO 0.50 KN - WITH 200 METERS PER MIN OF BEAMING - AUTOMATIC MOVEMENT OF MACHINE AUTOMATIC LEASING DEVICE - WITH WAXING - YARN TENSION ELEMENT ON CREEL MODEL GZV FS - CREEL AVAILABLE: N. 1 BENCREEL 320 CONES - GAUGE 270 MM - YARN TENSION MOTORIZED - WITH BENGUARD - VOLTAGE 380V 50HZ PG 773: N. 1 SECTIONAL WARPING MACHINE - MAKE BENNINGER MODEL SUPERTRONIC - YEAR 1987 - WORKING WIDTH 2600 MM - DRUM DIAM. 900 MM - CONE RATIO 1:5 - MANUAL TENSION CONTROL - CREEL BENNINGER MODEL GAAB/UR 560 POSITIONS - GAUGE 270 MM - AUTOMATIC BREAKING SYSTEM - BEAM FLANGE DIAM. 1000 MM PG 810: N. 1 SECTIONAL WARPING MACHINE MAKE BENNINGER - MODEL SFS - WITH FIXED CONE STEEL DRUM - YEAR 1984 WORKING WIDTH 2250 MM - WITH FIXED CREEL TYPE F - ANGLE 11°19' - RATION 1/5 - DOUBLE FEEDING, WIDTH 2200 MM CREEL WITH 320 CONES - IONISER - WITH WAXING - REED EXCELLENT CONDITION - AUTOMATIC SECTION BUILDING PG 821: N. 1 SECTIONAL WARPING MACHINE BENNINGER MODEL BENTRONIC - YEAR 1998 - 220 CM WIDTH - FLANGE 800 MM - ELECTRONIC CONTROLS FOR SECTION - CONE DIAMETER 800 MM - DIGITAL DISPLAY (LANGUAGES AVAILABLE ENGLISH, SPANISH, FRANCH, GERMAN) - PADDLE FOR SLOW MOVEMENT FORWARD/BACKWARD - MAX/MIN TENSION OF BEAMING 3.00 TO 0.50 KN - WITH 200 METERS PER MIN OF BEAMING - AUTOMATIC MOVEMENT OF MACHINE - AUTOMATIC LEASING DEVICE - WITH WAXING - VOLTAGE 380V 50HZ - WITHOUT CREEL PG361: N. 1 SECTIONAL WARPER COMAT - MODEL ASSO 3 - WORKING WIDTH 2300 MM - DIAMETER DRUM 600 MM - CREEL FOR 240 CONES PG 559C:N. 2 WARPING MACHINE FOR SILK MAKE SALVATICO - YEAR 1980 - WORKING WIDTH 1800 MM - WITH CREEL 500 POSITIONS - GAUGE 180 MM - CONES MAX DIAM. 140 MM - BEST FOR SILK PG 799: N. 1 SECTIONAL WARPING MACHINE MAKE KARL MAYER - YEAR 1999 - MODEL NAME EDM ECON O MATIC - WITH WIDTH 2250 MM - DIAMETER DRUM 825 MM - DIAMETER WARP 1.075 MM - MAX SPEED OF WARPING 600 M/MIN - FORCE NEWTON WARP 600N - CIRCUMFERENCE OF CYLINDER 2.590 MM - MIN WARPING LENGTH 16 METERS - ELECTRONIC MACHINE CONTROLS - REED AUTOMATIC TYPE - DIAM MAX BEAM 1000 MM - BEAM SIZE MAX 3.000 MM - WITH WAXING MAX BEAMING SPEED 75 M/MIN - WITH DISPLAY COMPUTER - CREEL MODEL ROSTONI - FOR 168 ENDS - WITH ELECTRONIC YARN TENSION CONTROL PG 687: N. 1 SECTIONAL WARPING MACHINE MAKE GA.MA.TEX. - MODEL G405 - YEAR 1994 - SERIAL 80/0 - COMPLETELY COMPUTERIZED - AUTOMATIC SECTION SETTING - WARPING WIDTH 240 CM - CONE 1000 MM - DIAMETER REEL 1000/1360 MM - DIAMETER BEAM FLANGE MAX 1.000 MM - WITH WAXING DEVICE - COMPLETE WITH CREEL OF 304 ENDS ELECTRONIC TYPE - WITH TENSIONERS - YARN FEELER - WITH HYDRAULIC BRAKES - 380V 50HZ PG 798: N. 1 SECTIONAL WARPING MACHINE MAKE GA.MA.TEX.- MODEL G405 - YEAR 1992 - COMPLETELY COMPUTERIZED AUTOMATIC SECTION SETTING - WARPING WIDTH 220 CM - CONE STEEL GREY CONE 1000 MM DIAMETER REEL 1000/1360 MM - DIAMETER BEAM FLANGE MAX 800 MM - WITH WAXING DEVICE - COMPLETE WITH CREEL OF 320 ENDS - ELECTRONIC TYPE - WITH TENSIONERS - YARN FEELER - WITH HYDRAULIC BRAKES - 380V 50HZ PG 319: N. 2 SAMPLE WARPING MACHINES MAKE HERGETH MODEL MSL 6251 A/1 - 10 METERS WARP - YEAR 1987 and 1988 WITH BEAMING - WITH COMPUTERIZED DESIGN ORDOMAT AGE AND AITA - WITH 4 WEFT FEEDERS ROJ - WITH UPDATED PNEUMATICS COMPLETE WITH CREEL   PG 841: . 1 SUZUKI NAS 131S - YEAR 2004 -  MAXIMUM WW = 2600 - COMPLETELY COMPUTERISED DRIVEN GPAO ROTATION CREEL WITH 8 WEFT ACCUMULATORS - STANDARD CREEL WITH 10 WEFT ACCUMULATORS - SW SYSTEM INCLUDED MACHINE IN EXCEPTIONAL CONDITION - ALMOST NEVER USED (MAX 50 HOURS) - ONLY WORKED IN A TEXTILE SCHOOL FOR DEMONSTRATION

OTHER WEAVING MACHINES: PG 547: N. 1 SIZING MACHINE MAKE SUCKER MULLER MODEL S-432 - YEAR 1988 - WORKING WIDTH 2200 MM - WITH 2 SIZING BOXES WITH DOUBLE SQUEEZE - 2X2 SQUEEZING CYLINDERS - MAX SQUEEZE 100 KN - AUTOMATIC TEMPERATURE CONTROL OF MOISTURE - WITH PREPARATION SIZING KITCHEN - TOTAL CAPACITY 800 LT - TANK CAPACITY 1000 LT - UPDATED MODIFICATION BY REXROTH - WITH DRYER COMPOSED BY 11 CYLINDERS DIAM. 800 MM - 2 GROUPS 5 STEEL CYLINDERS MODEL ZS-6 - 6 TEFLON CYLINDERS CYLINDER WIDTH 2000 MM - WITH BEAM CREEL 24 BEAMS WITH BRAKING SYSTEM FOR TENSION CONTROL - WITH ELECTRONIC HUMIDITY CONTROL - DELIVERY HEAD WITH CONTROLS WITH BEAMING FLANGE 800 MM - WITH WIDTH 220 CM  PG 547A: N. 1 DIRECT WARPING BENNINGER - WITH NEW CREEL BENMATIC - MODEL ZDA YEAR 1988,SPEED 1000/1200 - COMPLETE WITH 30 BEAMS - WIDTH  1800 MM - DIAM MAX 800/900 MM - WITH CREEL MODEL BENMATC WITH YARN TENSTION CONTROL CENTRALISED YEAR 1997 - H CREEL - MAX 576 POSITIONS PG 656: N. 1 SUCKER SIZING MACHINE MODEL WN10 - YEAR 1986 - DELIVERY HEAD WORKING WIDTH 335 CM - DELIVERY HEAD NEW OF  YEAR 2002 - AUTOMATIC REGULATION OF SPEED - 7 DRYING CYLINDERS - WITH SINGLE SIZE BOX - LCI/ LCIII WIDTH 180 CM - YEAR 1972 - SIZE BOX WITH TWO IMMERSIONS AND TWO SQUEEZES - WITH SIZE KITCHEN - 2 CREELS FOR BEAM  FOR 12 MOVABLE SECTIONS - WITH 1 EXTRA CREEL FOR FURTHER 5 SECTIONS - PIV REGULATOR UPDATED - SOME SPARES - ELECTRONIC HUMIDITY CONTROL - WITH SUCTION HOOD PG 656 A: N. 1 BENNINGER DIRECT WARPING MACHINE - WORKING WIDTH 180 CM - YEAR 1974 - COMPLETE WITH V CREEL - 640 CONES - ROTARY CREEL FOR CONE CHANGE - BEAM FOR WARPING - BENNINGER CREEL WITH TENSIONER MACHINES WORKING WEAVING ACCESSORIES: PG 427/431: SPARE PARTS COMPLETE LOTS FOR FOLLOWING SULZER MACHINES: G6100 / F2001 / G6200 PG 186: VARIOUS WEAVING ACCESSORIES:  N. 1 AUTOMATIC BEAM TROLLEY "RESTELLI" MODEL SU/B1000 - N. 1 LITTLE CRANE FOR BEAMS, CLOTH REEDING  (PICTURES AVAILABLE UPON REQUEST)  PG 501: N. 1 KNOTTING MACHINE TITAN - MODEL KM2000 - YEAR 1992 - PREDISPOSED FOR DOUBLE KNIT - COMPLETE WITH N. 1 TROLLEY FOR THE KNOTTING MACHINE WW 2100 MM PG 744: N. 2 MECHANICAL JACQUARD MAKE STAUBLI MODEL CR620 - 1344 HOOKS – 1200 WORKING - MATRICOLA 89370-30 - MATRICOLA 89370-28 - YEAR 10-1989 PG 788D: N. 4 ELECTRONIC JACQUARD MAKE STAUBLI - MODEL CX860 - YEAR 1996 - 1344 HOOKS EACH CONTROLLER JC4 MODULE M4 PG 788E: N. 6 MEACHANICAL JACQUARD MAKE STAUBLI - MODEL CR500 - 1344 HOOKS - YEAR 1985 PG796: N. 1 KNOTTING MACHINE MAKE KNOTEX - MODEL XS 3715 A 02 - SERIAL  NO. 791/123 - 220 VOLT - 50/60HZ WITHOUT TROLLEY - WITH SOME SPARE PARTS PG 807: N. 1 USTER DRAWIN IN MACHINE - MODEL DELTA 1 - YEAR 1989 - WW 2200 MM - SPEED 140 WITH 2 TROLLEYS PG 824: N. 1 FABRIC LABEL MACHINE  PG 824A: N. 1 FABRIC SAMPLE CUTTING MACHINE OPEN END MACHINES: PG 552: N. 6 OPEN END MACHINE SCHLAFHORST MODEL ACO 288 SE9 - 192 HEADS - YEAR 1997 -SPIN BOX SE 9 - ROTOR TYPE T 340 BD - ALL MACHINES SRZ TYPE - DELIVERY CONE 1°20 OR CHEESE - CARDING SYSTEM S 21 DN - NODDLE KN4 - 2 DOFFERS - BOBBINS CHANGING SYSTEM - WITH CLEARER COLORAB 7 PLUS PG 858: N. 2 OPEN END MACHINE SCHLAFHORST - MODEL SE9 SRK - 240 ROTORS EACH - UPG4 CLEARER - INFORMATOR YEAR OF CONSTRUCTION 1990 - ROTOR T333 - 1 ROBOT WOOLLEN CARDING MACHINES: PG 790: N. 1 CARDING MACHINE MAKE OCTIR MODEL TITANO CL 3P - YEAR 1986 - WORKING WIDTH 3500 MM  - DELIVERY CANS 1000X1200 - FEEDING WITH SILOS - DELIVERY IMAT ROTARY HEAD GILL YEAR 1986 MODEL IT 21 - 2 OVERHEAD CRANES MOUNTED ON DEMAG GUIDES - CAPACITY 200 KG EACH - FOR CYLINDERS LIFTING AND MACHINE'S CLEANING CARDING MACHINE WORKING ON 100% WOOL FIBRE WITH 3 MORELS FLYER MACHINES: PG B1-1: N. 1 FLYER NSC TYPE BM 14 (YEAR 1982) - 64 SPINDLES - SERIAL 1674 - FEEDING 64 CANS OF 700X1200 MM. - LITTLE BIBERON RUBBER CYLINDER SYSTEM - BOBBINS DELIVERY DIAM. 180 X 350 MM.  ACRYLIC AND WOOL SPINNING FRAMES: PG F25: N. 2 COGNETEX FTC – 9L SPINNING FRAMES (YEAR 1987) – SERIAL 432/87 – 433/87 - DOUBLE SIDE WITH SINGLE CONTROL OF 432 SPINDLES - FEEDING FROM BOBBIN FINISHER – 2 ROVINGS PER BOBBIN - SPINDLES DRIVE AT TANGENTIAL BELT - AUTODOFFING - WITH SINGLE MAGITEX CLEANING DEVICE ON EACH MACHINE PG F27: N. 1 COGNETEX FTC – 9L SPINNING FRAME (YEAR 1990) – SERIAL 04068/89 -DOUBLE SIDE WITH SINGLE CONTROL OF 432 SPINDLES - FEEDING FROM BOBBINS FRAME - SPINDLES DRIVE AT TANGENTIAL BELT - AUTODOFFING WITH MAGITEX CLEANING DEVICE - GAUGE: 90 MM - 432 SPINDLES - RING: DIA. 65 MM - HIGH DRAFT FRAME WITH DOUBLE BELT - ARM SKF 962/670 PG 793: N. 1 COGNETEX SPINNING FRAME - MODEL FTC7L - YEAR 1989 - GREY TYPE - GAUGE 75 MM - N. 576 SPINDLES - RING RAIL DIAMETER 48 MM - WITH AUTOMATIC DOFFING SINGLE PIPE - MAGITEX CLEANING DEVICE ON EACH MACHINE - SKF ARM PK 1601 - COMPLETE OF ALL PIECES AND ACCESSORIES PG 845: N. 2 GAUDINO SEMIWORSTED SPINNING FRAMES - MODEL FPK4508CLA - YEAR 1990 - N. 216 SPINDLES EACH MACHINE - RING RAIL DIAMETER 90 MM - WITH AUTOMATIC DOFFING - 8 ROLLERS - CREEL FOR CANS - TUBE LENGHT 450 MM - COMPLETE WITH DISPLAY AUTOMATIC CONER MACHINES: PG 19: N. 1 SAVIO WINDING MACHINE - MODEL RAS 15L  MATRICULA NUMBER 45101183 - YEAR OF CONSTRUCTION 1983 - SOFT CONER MACHINE FOR DYEING CONES - WITH KNOTTER - CONE TO CONE WITH AUTOMATICAL FEEDING - AUTOMATIC DOFFING - N. 24 SPINDLES - ELECTRONICAL CLEANER PEYER PI12 - INSPECTOR METER - METER COUNTER PER EACH SPINDLE - TRAVERSE 6" CONICITY 4°20' - ELECTRONIC CONTROL EACH SPINDLE - WITH CLEANING DEVICE - ELECTRIC POWER 380V 50HZ  PG R01: N. 9 SAVIO WINDERS MODEL ESPERO OF 24 POSITIONS (YEAR 1990) FOR 8 MACHINES AND 32 FOR 1 MACHINE AUTOLOADING AND AUTODOFFING - 2 MACHINES WITH WAXING DEVICE - WITH MESDAN SPLICERS:  JOINTAIR TYPE 480 FOR NORMAL YARNS FOR ALL 8 MACHINES - JOINTAIR TYPE 494/1 FOR CREPE YARNS EXTRA FOR 3 MACHINES - SPLICERS FEATURES: TYPE 480:ROOM 251 OSCILLATORS S-Z - TYPE 494/1: ROOM 14S – 14Z  OSCILLATORS S20 – Z20 - PEYER P550 CLEARERS ON MACHINES WITH 24 POSITIONS AND USTER D5 ON 32 SPINDLES MACHINE - DELIVERY 6”  TUBE CONICITY 4° 20’ - WITH INSPECTOR CONTROL PG 777: N. 1 SCHLAFHORST CONER MACHINE MODEL 238 - YEAR OF CONSTRUCTION 1990 - MACHINE RIGHT - 30 HEADS WITH AUTOMATIC FEEDER AND DOFFING - WITH WAXING - TRAVERSE 6" - CONICITY 4°20' - ELECTRONIC CLEARER USTER MK-C15AC - SPLICER ORIGINAL SCHLAFHORST - ALSO AVAILABLE FISHERMAN KNOTTING DEVICE  PG 777A: N. 1 SCHLAFHORST CONER MACHINE MODEL 138 - YEAR OF CONSTRUCTION 1987 - MACHINE RIGHT - 50 HEADS WITH AUTOMATIC FEEDER AND DOFFING - 3 DOFFING TROLLEYS - WITH WAXING - TRAVERSE 6" - CONICITY 4°20' ELECTRONIC CLEARER USTER D4 CK20 - WITH CONOMETER - DOUBLE SPLICER ORIGINAL SCHLAFHORST - ALSO AVAILABLE FISHERMAN KNOTTING DEVICE PG 778: N. 1 SAVIO CONER MACHINE MODEL ESPERO - YEAR 1996 - MAGAZIN TYPE - 36 SPINDLES - TRAVERSE 6" CONICITY 5°57' - WITH WAXING DEVICE - AUTOMATIC DOFFING WITH 2 TROLLEYS - ELECTRONIC CLEARER USTER MKC20 SPLICER MESDAN 490L AND FISHERMAN KNOT - WITH INVERTER - CAN WORK WITH TUBE FROM 260 UP TO 350 MM PG 778A: N. 1 SAVIO CONER MACHINE MODEL RAS15L - UPDATED AND RECONDITIONED COMPLETELY ON 1997 - MAGAZIN TYPE - 24 SPINDLES - TRAVERSE 6" - CONICITY 5°57' - WITH INSPECTOR METER - WITH WAXING DEVICE - AUTOMATIC DOFFING - ELECTRONIC CLEARER LOEPFE FL60 - SPLICER MESDAN 927L AND FISHERMAN KNOT - WITH INVERTER CAN WORK WITH TUBE FROM 260 UP TO 450 MM   PG 857: N. 1 AUTOCONER SAVIO ESPERO MODEL RS - 32 HEADS - MAGAZIN TYPE - 1994 - CLEARERS USTER QUANTUM IMK 030-F23 - DOUBLE FEEDER - DOUBLE DOFFING (2 TROLLEY) - WITH TWO BELTS FOR UNLOAD OF CONES (ONE RIGHT AND ONE LEFT) - WITH TWO BELTS FOR UNLOAD OF TUBES (ONE RIGHT AND ONE LEFT) - N.32 KNOTTERS SPLICERS 4901 X BLOWER MAGITEX - POSSIBILITY TO FEED TUBES TILL 350 MM - WITH WAXING DEVICE - EXIT BY CONE 6" 5°57' PG 857 A: N.1 AUTOCONER SAVIO ESPERO MODEL RS - 60 HEADS - MAGAZIN TYPE - 1994 - CLEARERS USTER UPC MK F20/23 - DOUBLE FEEDER - DOUBLE DOFFING - WITH TWO BELTS FOR UNLOAD OF CONES (ONE RIGHT AND ONE LEFT) WITH TWO BELTS FOR UNLOAD OF TUBES (ONE RIGHT AND ONE LEFT) - KNOTTERS SPLICER 490 L - BLOWER MAGITEX - WITH WAXING DEVICE - EXIT BY CONE 6" 5°57' PG 857 B: N.1 AUTOCONER SAVIO ESPERO MODEL RL - 60 HEADS FOR CONE TO CONE - 1997 - AUTOMATIC CONE FEEDING CHANGE - CLEARERS UPC MK F20/23 - AUTOMATIC DOFFING - BELT FOR UNLOAD CONES (LEFT) MAGAZINE CONES KNOTTER MOD.410 - BLOWER MAGITEX - WITH WAXING DEVICE - EXIT BY CONE 6" 5°57' MANUAL CONER MACHINES: PG R.10: N. 1 RITE  WINDER MOD. RCR-N OF 32 POSITIONS (YEAR 1996) - SERIAL  9R 320395 - WITH CLASSIMAT - WITH SPLICER - WITH BLOWER MAGITEX PG 838: N. 7 AUTOMATIC SOFT/HARD PRECISION CONE WINDERS - MAKE SSM MODEL PW1S - DIGITAL TYPE - WITH INDIVIDUAL MOTOR - HEAD PANEL - YEAR 1995/96 (6) 42 HEADS AND (1) 48 HEADS - WITH PROGRAMMER PRECIFLEX DIGICOM RANDOM - YARN FEELER  REELING MACHINES: PG 716: N. 2 ZERBO REELING MACHINES - MODEL GX60 - YEAR 1998 - 17 HANKS PER EACH SIDE - HANKS SHAFT 6 METERS ON EACH SIDE - RPM 420 - HANK LENGHT 290 MM - WITH AUTOMATIC KNOTTING DEVICE ON EACH SIDE TWISTING MACHINES: PG 14: N. 1 HAMEL SAURER ELASTIC TWISTING MACHINE - MODEL ET 240 C MIT 200 SPINDELN - YEAR 2001 HOLLOW SPINDLES - N. 200 SPINDLES ON TWO SIDES (100+100) - TRAVERSE 6" - CONICITY 4°20' - CAN SIZE 5" - MAX SPEED 14.000 RPM - TORSION "S" AND "Z" - ELECTRONIC DRAFT - STOP MOTIONS FOR LYCRA FEEDING AND IN THE EXIT ELECTRIC POWER 380V 50HZ - Complete with N. 1 HAMEL SAURER ASSEMBLY WINDER MODEL HD MIT - YEAR 2001 N. 12 SPINDLES   PG 407: FANCY YARN PLANT COMPOSED BY: N. 5 NSC SCHLUMBERGER INSTERSECTING MODEL GN4 + N. 4 SANT'ANDREA INTERSECTING MODEL SEU + N. 1 LEZZENI MARIO CONE WINDER PREPARATOR MODEL SLV H OF YEAR 1980 WITH 20 SPINDLES - DOUBLE SIDE + N. 3 PAFA FANCY TWISTING MACHINES MODEL EXPO 90 - YEAR 1984/85/86 - N. 30 SPINDLES EACH MACHINE - HOLLOW SPINDLE - FLANGED BOBBINS - WITH CREEL + N. 2 WELLER FANCY TWISTING MACHINES 18 SPINDLES EACH - WITH CREEL + N. 1 RAMELLA RAISING MACHINE - 30 YARNS - EXIT BY CAKE AND HANKS / PRODUCTION CAPACITY WITH A COUNT RANGE NM 2000: KG 1500 PER DAY VACUUM STEAMER: PG V2: N. 1 OBEM AUTOCLAVE – MOD. VFV – 430/E (YEAR 1978) - WORKING PRESSURE: 1 KG/SQ. CM. - HIGHEST TEMPERATURE: 119° C - WORKING TEMPERATURE: FROM 50° TO 98° C - DIRECT STEAMER HEATING (SATURATED STEAM HIGHEST PRESSURE 0,5 KG/SQ.CM) KIER CAPACITY: 975 LITRES - CAPACITY OF YARN TO BE TREATED: 600 KG. OF CONES OR 3 TRUCKS - AUTOMATIC RUNNING CHENILLE MACHINES: PG 15: N. 2 CHENILLE MACHINES GIGLIOTTI & GUALCHIERI – MODEL AR100 – N° 4 SPINDLES EACH – WITH AXIAL BLADES AND UNWELDED STEEL WIRES – 1 MOTOR EACH 2 SPINDLES WITH CASH-FIL FOR AUTOMATICAL STOPPING - WITH PIRN BENCH FOR BOBBINS PREPARATION  PG 727: N. 2 CHENILLE MACHINE PAFA - MODEL LEGAFIL - YEAR OF CONSTRUCTION 2000 - N. 104 SPINDLES EACH - RING DIAM. 115 MM - WITH CREEL - WITH CLEANER AND BLOWER PG 839A: N. 2 GIGLIOTTI & GUALCHIERI CHENILLE MACHINES - MODEL ACTA - YEAR 2000 - 120 SPINDLES EACH - WTIH INVERTER - ELECTRONIC TYPE - ROTARY CHENILLE BLADES - WITH LATERAL CREEL - WITH BLOWING DEVICE MAGITEX COMPLETE WITH PLASTIC TUBES AND ACCESSORIES PG 839B: N. 1 GIGLIOTTI & GUALCHIERI CHENILLE MACHINE - MODEL EPT2 - YEAR 2002 - 120 SPINDLES - ELECTRONIC TYPE - WITH FANCY PROGRAMMER - ROTARY CHENILLE BLADES - WITH LATERAL CREEL - WITH BLOWING DEVICE MAGITEX COMPLETE WITH PLASTIC TUBES AND ACCESSORIES EMBROIDERY MACHINES:   PG 488: NO. 1 EMBROIDERY MACHINE MAKE LAESSER MODEL L120 LCS - TWIN CAM WITH 15 YARDS AND 120 CM FIELD  DOUBLE SIDE - WITH COLOUR CHANGE NEEDLE SHUTTLE - SPEED 320/330 - YEAR 2000 PG 794: N. 2 EMBROIDERY MACHINES - COMERIO MODEL CE-15/108N - YEAR 1986-1989 - MAX EMBROIDERY WIDTH 300 CM - MAX LENGTH OF WORK 15 METERS - 4 COLOURS MACHINES - MACHINES COMPLETE WITH COMPUTER TO MANAGE DRAWINGS - POSSIBILITY TO LOAD THE DRAWINGS BY FLOPPY DISKS - MACHINES STILL RUNNING AND IN VERY GOOD CONDITIONS FINISHING MACHINES: PG 182: N. 1 FINISHING MACHINE KD BIELLA PROCESS FOR WORSTED FABRIC - NO. 1 KD DECOCLAV 10 CL MAKE M-TEC  GERMANY - FOR WOOL AND MIXED WOOL DECATIZING - CAN WORK WITH SATIN - CAPACITY 600MT/500MT FOR MEDIUM WEIGHT FABRIC - WITH ELECTRONIC PROGRAMMER AND DOUBLE COOILING PUMP - POSSIBILITY TO WORK WITHOUT PRESSURE AS ATMOSPHERIC DECATIZER - SPEED 100 MT/MIN - CYLINDER DIAM. 900 MM - YEAR 1996 - WITH WEFT STRAIGHTENER ELECTRONIC MAKE CORINO - WITH BRUSHER CORINO - WIDTH 1800MM    PG 397: N. 1 CONTINUOUS DECATIZING MACHINE MAKE SPEROTTO RIMAR MODEL MULTIDECAT 2 - WIDTH 190CM - WIDTH OF FELT 170CM  - WITH CENTRING GUIDES OF CORINO MAKE SLEEPING ROLL - NO 1 WEFT STRAIGHTENER PIN TYPE OF COMPANY CORINO - NO 1 BRUSH DEVICE WITH SUCTION FOR DUST FOR FABRIC CLEANING - YEAR 1988 N. 2 MERCERIZING MACHINES JAEGGLI TYPE MM6 - FOR 2 X 3 KG HANKS - PRODUCTION CA. 50 KG/H - WITH HYDRAULIC DEVICE - 1 MACHINE YEAR 1974 - 1 MACHINE YEAR 1980 VARIOUS: PG 166: N. 1 HANK PRESS – BY AIR COMPRESSOR PG 167: VARIOUS LABORATORY DEVICES (PICTURES AVAILABLE ON REQUEST)  PG 78: N. 4 HUMIDIZERS DEFENSOR MODEL ABS2 - SINGLE HEAD - 9 LT/HOUR EACH - LIKE NEW NEVER USED PG 79: N. 1 HUMIDIZER DEFENSOR MODEL 13T - DOUBLE HEAD PG 454: N. 1 CAMPANINI BALLING MACHINE - MODEL GMT 80.10 - MATRICULA 0107 - ELECTRONIC - YEAR 1983 - 10 SPINDLES - WITH SOME SPINDLES SERIES PG 534: N. 2 SPOOLING MACHINES - SILK REELING - MAKE COLLEONI - YEAR 1994 - WITH REELS 117 G - FOR SILK WINDING 20/22 AND 40/44 - WINDING SPEED 350 METERS - 90 SPINDLES EACH MACHINE - WITH CONTROL PANEL - MACHINE CONDITION EXCELLENT - WITH REELING SKEINS TOTAL 90 NOS - MACHINE DELIVERY IS FLANGED - SPOOLS OF 2 LB SIZE - 380V 50HZ FEED PG 600: N. 2 LAFER RAISING MACHINE - (1) MODEL GRI-124/C (1) MODEL GRI-124/T - WORKING WIDTH 2200 YEAR 2003 MACHINES IN PERFECT CONDITIONS LIKE NEW - FEW HOURS WORK PG 626: N. 2 OBEM CONE DEYING MACHINES - MODEL API-1070-VB/PA.BAR 4,5 - YEAR 1988 COMPLETELY RECONDITIONED AND OVERHAULED - FOR SINGLE DYEING AND PARALLEL DYEING - 155° C - LT 1961 - N. 105 CONES EACH - KG 150+150 - N. 4 TRUCKS FOR CONES AS STORE - WITH ELECTRICAL PANELS AND PROGRAMMERS NEW PG 626A: N. 1 OBEM CONE DEYING MACHINE - MODEL API-850-VB.50.BAR 4,5 - YEAR 1983 - FOR SINGLE DYEING AND PARALLEL - 155° C - LT 1290 - N. 54 CONES - KG 80 - N. 1 TRUCK FOR CONES AS STORE - WITH ELECTRICAL PANELS AND PROGRAMMERS PG 626B: N. 1 OMLI CONE DYEING MACHINE FOR SAMPLES - YEAR 1980 - UNDER PRESSURE - 2 CONES - PROGRAMMER SALCE - COMPLETELY RECONDITIONED PG 626C: N. 2 NOSEDA CONE DEYING MACHINES - YEAR 1981 - COMPLETELY RECONDITIONED AND OVERHAULED - FOR SINGLE DYEING AND PARALLEL DYEING - 150° C  BAR.6 - LT 2700 + 2700 - N. 155 CONES EACH - KG 250+250 - N. 2 TRUCKS FOR CONES AS STORE - WITH ELECTRICAL PANELS AND PROGRAMMERS   PG 650: N. 1 INDUSTRIAL GAS TURBINE PLANT - MAKE TUMA TURBOMACH - SWISS MADE - MODEL SATURN T-1500 - GENERATION OF ELECTRICAL ENERGY FROM GAS - OUTPUT POWER 1030KW CONTINUOUS GAS FUEL 1000 KW LIQUID FUEL 1230 KW  PEAK POWER LIQUID FUEL PG 691: N. 1 FOULARD MAKE KUSTER - YEAR 1990 - WITH OIL PUMP - WITH TWO CYLINDERS SQUEEZERS - EXIT PLAITER  PG 691 A: N. 1 BIANCALANI AIRO 1000 - YEAR 1990 - WORKING CONDITION - WITH 600 METERS FABRIC COTTON FABRIC FINISHING FOR MAKING SOFTNESS TO FABRIC - OIL HEATED - WITH EXHAUST - HEAT EXCHANGER PG 691 B: N. 1 WASHING RANGE OPEN WIDTH MAKE GOLLER - WIDTH WORKING 2000 MM - WITH 9 TANKS - ENTRANCE BATCHING - WITH SYSTEM FOR FABRIC CLEANING TVE - SUCTION WITH SQUEEZERS EACH TANK EXIT - CONTROL PANEL TERMO ELECTRONICA CT 401 - HEAT EXCHANGERS POZZI - FILTERS BETA - YEAR 1994 - MACHINE RUNNING CONTROLLED THROUGH A DISPLAY AND LARGE PANEL PG 691 C: N. 1 CALENDERING MACHINE MAKE BETA - YEAR 1991 - WORKING WIDTH 2200 MM - EXCELLENT CONDITION WITH NYLON CYLINDER AND ONE STEEL CYLINDER - HEATED BY OIL - OIL CENTRALISED PUMP - WITH BATCHING OUTLET EXTRA NYLON CYLINDER - WORKING FOR COTTON CALENDERING TO MAKE SHINING FABRIC 180T COOLER AT EXIT PG 694: N. 1 RAISING EMERSIZING MACHINE MAKE SALVADE' - YEAR 1998 - 220 CM WORKING WIDTH - WITH CARBON BRUSH - WITH INVERTER MOTOR AND CONTROL PANEL - 24 CYLINDERS WITH PAPER 200 - ALTERNATIVE DRIVE ON GROUP OF CYLINDERS - WORKING FOR WORSTED AND BLEND SUITING - MACHINES WILL BE TESTED AND RUN WITH PLAITING PG 694B: N. 1 RAISING MACHINE FOR CARPET MAKE MORTAMET FRANCE  TYPE MX 245 - WORKING WIDTH 3200 MM - WITH 30 CYLINDERS DIAM 80 WORKING FOR CARPET - IN OUR WAREHOUSE - MACHINE IN EXCELLENT CONDITION - MACHINE SUPPLY WILL BE TESTED AND RECONDITIONED - WITH INSTALLATION IF NEEDED - INVERTER TYPE MOTORS - YEAR 1998 PG 694C: N. 2 RAISING MACHINES FOR CARPET - MAKE LAFER MODEL GRV 80 - WORKING WIDTH 320 CM - 2 GROUPS OF 24 CYLINDERS EACH - WITH PIV DRIVES - DUPLEX MACHINE - YEAR 1990 - CONTROL PANEL - WITH PLAITING - MACHINES WILL BE TESTED AND RUN IN OUR WORKSHOP - RUNNING CONDITION PG 711: N. 2 PROTTI FLAT KNITTING MACHINE MODEL  PV94X - GAUGE 12 - 2/2  528 NEEDLES - YEAR 1996/97 + N. 1 PROTTI FLATI KNITTING MACHINE MODEL PV96X - GAUGE 12- 2/3 - 528 NEEDLES - YEAR 1999 + N. 1 PROTTI FLAT KNITTING MACHINE MODEL PV91X - 12 GUAGE  2/1 - 552 NEEDLES - YEAR 1997 PG 751: N. 3 ORIZIO CIRCULAR KNITTING MACHINES - MODEL JOHN/C - YEAR 1997 - DIAMETER 20 - GAUGE 28 PG K1: N. 3 COMPRESSOR INGERSOLL SSR - MODEL SSR MH 45  PG K2: N. 1 COMPRESSOR INGERSOLL SSR - MODEL SSR ML 75 PG K3: N. 1 DRYER SSR MODEL TMS225 PG L1: COMPLETE USTER AND BRUSTIO LABORATORY COMPOSED BY MANY DEVICES- DETAILS UPON REQUEST   PG 820: N. 1 GALVANIN DRYER MACHINE - MODEL CRA18 - YEAR 1996 - FOR CONES COMPLETE PLANTS: PG 376: COMPLETE RAG TEARING LINE COMPOSED BY: N 1 FEEDING PLANTFORM PAIT TM 100B - N. 1 CUTTER MAKE PIERRET BELGIUM CT 60/20 WITH FIXED BLADE  AND WITH A MOVING CUTTER WITH WORKING WIDTH 600 MM - N. 1 METAL DETECTOR - N. 1 CUTTER SHARPNER - N. 2 FEEDING CELLS ALEX CAPACITY 36 CUBIC METER - N. 1 BALE PRESS ALEX WIDTH 3000 MM - N. 1 RAG TEARING MACHINE ROLANDO WIDTH 1800MM WITH YEAR 1984 WITH FEEDERS, WITH 5 CYLINDERS, WITH 2 CONDENSERS WITH TWO EXTRA MOTORS  AND ONE EXTRA CYLINDER - N. 1 BALE PRESS GUALCHIERANI FOR AUTOMATIC BALING OF WASTE BALE TYPE BSG 60 - N. 1 AIR FILTERING AND DUST COLLECTION PLANT MAZZINI - ALL MACHINES VOLTS 500    PG 377: COMPLETE OPEN END PLANT: N. 2 FEEDING CELLS WITH TRANSPORTING BELT – LENGHT 10.000 MM – WIDTH 3.500 MM – HIGHT 5.000 MM EACH - N. 1 MIXING CELL  AND MATERIAL TRANSPORT FAN TO TRANSPORT TO FEEDERS - N. 1 RIETER AUTOMATIC FEEDER MODEL 3/4R YEAR 1988 WITH CONDENSER - N. 1 METAL DETECTOR CEJA YEAR 1988 - N. 1 OPENER RIETER MODEL B5/5 TYPE ERM YEAR 1988 - N. 4 RIETER CARDING MACHINES MODEL C4 WITH FEEDING SILOS – WITH AUTOLEVELLER SHUBERT U.SALZER EXIT BY CAN 45 X 90 CMS WITH AUTOMATIC CAN DOFFING - N. 3 RIETER /INGOLSTADT  OPEN END MACHINES – MODEL RU14 – YEAR 1987 (2) AND 1990 (1) – 216 ROTORS EACH CANS FEEDING 45 X 90 CMS – WITH 2 DOFFING /PIECER CARRIAGES EACH MACHINE  PG 474: CHENILLE PLANT PRODUCTION COMPOSED BY: N. 2 GIGLIOTTI & GUALCHIERI CHENILLE MACHINES - YEAR 1998 AND 1999 - 80 SPINDLES EACH - ELECTRONIC TYPE - ROTARY CHENILLE BLADES - WITH LATERAL CREEL - WITH BLOWING DEVICE MAGITEX - COMPLETE WITH PLASTIC TUBES AND ACCESSORIES + N. 1 GIGLIOTTI & GUALCHIERI CHENILLE MACHINE  - YEAR 1999 - 40 SPINDLES + N. 1 GIESSE CHENILLE MACHINE - YEAR 1999 - 32 SPINDLES PG 477: RING SPINNING COMPLETE PLANT FOR MANUFACTURING SEMIWORSTED POLYESTER/ACRYLIC /WOOL YARN PG 582: LATEST TECHNOLOGY HORIZONTAL CONE DYEING PLANT COMPOSED BY DIFFERENT DYEING MACHINES - DETAILS UPON REQUEST PG 624: VERTICAL CONE DYEING PLANT COMPOSED BY NOSEDA DYEING MACHINES - DETAILS UPON REQUEST PG 637: COMPLETE RAISING/SHEARING PLANT MAKE LAFER YEAR 1988 COMPOSED BY: N. 1 LAFER RAISING MACHINE MODEL GRI-90 DUPLEX + N. 1 LAFER RAISING MACHINE CHARDON - WORKING IN MATCH WITH N. 1 LAFER SHAERING MACHINE MODEL GLC + N. 1 LAFER SHEARING MACHINES MODE C1C - WORKING WIDTH 1900 MM + N. 1 LAFER SHEARING MACHINE MODEL CMS-2 - WORKING WIDTH 1900 MM - VELVETING BRUSHES - AUTOMATIC CONTROLLER - SEMIAUTOMATIC DEVICE FOR PILE HEIGHT - MICROPROCESSOR FOR DATA INSERTION OF ITEMS - N. 2 LAFER SHEARING MACHINES ON LINE MODEL CMS - WORKING WIDTH 1900 MM - YEAR 1994 PG 649: RAFFIA POLYPROPYLENE BAGS MANUFACTURE PLANT FROM FIBRE TO FABRIC COMPOSED BY: N. 1 EXTRUSION OF POLYPROPYLENE - WITH 60 POSITIONS + N. 1 WARPING MACHINE MAKE FONTANA WIDTH 1500 MM + N. 1 CREEL WITH 600 SPINDLES + N. 4 RAPIER LOOMS FOR WOVEN POLYPROPYLENE FABRIC MODEL AC/2S + N. 1 RAPIER LOOM WIDTH 220 CM - WITH SPARES AND ACCESSORIES PG 680: COMPLETE PLANT FOR SYNTHETIC FILAMENT: COMPOSED BY N. 2 TFO TWISITNG MACHINES MAKE RATTI MODEL TRN +N. 2 TFO TWISITNG MACHINES MAKE RATTI MODEL TRN + N. 3 COPS WINDER MAKE LEZZENI MODEL ZETTO + N. 2 TWISTING MACHINES MAKE RATTI MODEL R522 + N. 1 COLLEONI ASSEMBLY WINDER - DETAILS ON REQUEST PG 734: COMPLETE RING SPINNING PLANT COTTON /BLENDS COARSE YARN - RING SPINNING PLANT - COTTON 100%  OR BLENDS COTTON/POLYESTER ETC - COUNT NE 10S/20S/30S - PRODUCTION  CONES FOR WEAVING OUT RIGHT SALE OF RUNNING TEXTILE BUSINESS IN ITALY FOR TAKE OVER: PG 651: AN IMPORTANT ITALIAN GROUP 50 YEARS IN TEXTILE BUSINESS IS LOOKING FOR FOREIGN COMPANY INTERESTED IN BUYING AND RUNNING THE YARN AND GARMENT DYEING PLANT IN NORTH OF ITALY. ITALIAN GROUP IS INTERESTED IN ALSO OUTRIGHT SELL OR RUNNING THE BUSINESS ON AS WORKING PARTNER. COMPLETE DYEING PLANT WITH LATEST TECHNOLOGY AUTOMATIC PROCESS DYEING YARN CONES OR IN HANK FORM - DYEING WOOL /COTTON/BLEND GARMENTS WINDING, YARN SHRINKING, YARN WAREHOUSE ETC - TOTAL AREA 37.000 SQ METERS LAND - BUILT AREA 8.500 SQ METERS. PRODUCTION CAPACITY 15.000/16.000 KG PER DAY - CONTINUOUS ORDERS OF JOB DYEING AVAILABLE FROM GERMANY AND THE PLANT IS RUNNING RIGHT NOW. PG 652: A SILK MANUFACTURING COMPANY PRODUCING FABRIC FOR HIGH FASHION BRANDS BASED IN ITALY AND IN THIS FIELD FROM PAST 80 YEARS IN BUSINESS OF SILK FABRIC, IS LOOKING FOR A FOREIGN COMPANY INTERESTED IN BUYING AND RUNNING THE WHOLE PRODUCTION FACTORY IN ITALY. THE ITALIAN GROUP IS INTERESTED TO SELL THE BUSINESS TO FOREIGN COMPANIES WHO WANT TO RUN IN EUROPE TEXTILE BUSINESS COMPANIES. ITALIAN GROUP WANTS TO MEET SERIOUS COMPANIES WHO ARE READY TO INVEST AND CONTINUE THE BUSINESS. FACTORY INCLUDES LATEST TECHNOLOGY LOOMS PROJECTILE, AIRJET OF 2007 AND OTHER LOOMS, WARPING, PREPARATORY, SAMPLING ,FABRIC WAREHOUSE. LOCATED IN PRIME AREA- ALL DETAILS OF CAPACITY, LAND BUILDING, MACHINERY DETAILS WILL BE PROVIDED IN MEETING IN ITALY. ONE YEAR PROGRAMME OF SALE OF FABRIC ALREADY RUNNING.